[conntrack-tools] x
Pablo Neira
netfilter-cvslog-bounces at lists.netfilter.org
Wed Dec 17 19:19:42 CET 2008
Gitweb: http://git.netfilter.org/cgi-bin/gitweb.cgi?p=conntrack-tools.git;a=commit;h=9bc7d7f8f333e79323495a193f92c9d4f1708da9
commit 9bc7d7f8f333e79323495a193f92c9d4f1708da9
Author: Pablo Neira Ayuso <pablo at netfilter.org>
AuthorDate: Wed Dec 17 19:19:21 2008 +0100
Commit: Pablo Neira Ayuso <pablo at netfilter.org>
CommitDate: Wed Dec 17 19:19:21 2008 +0100
x
via 9bc7d7f8f333e79323495a193f92c9d4f1708da9 (commit)
from a3c63cd051503207459ba01cddb7e468d6ac10e3 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
commit 9bc7d7f8f333e79323495a193f92c9d4f1708da9
Author: Pablo Neira Ayuso <pablo at netfilter.org>
Date: Wed Dec 17 19:19:21 2008 +0100
x
-----------------------------------------------------------------------
doc/sync/alarm/conntrackd.conf | 10 ++++++----
doc/sync/ftfw/conntrackd.conf | 12 +++++++-----
doc/sync/notrack/conntrackd.conf | 16 ++++++++++------
3 files changed, 23 insertions(+), 15 deletions(-)
diff --git a/doc/sync/alarm/conntrackd.conf b/doc/sync/alarm/conntrackd.conf
index 0d4847b..f42a799 100644
--- a/doc/sync/alarm/conntrackd.conf
+++ b/doc/sync/alarm/conntrackd.conf
@@ -80,9 +80,10 @@ Sync {
# sender queue. The overrun results packet loss, thus, losing
# state information that would have to be retransmitted. If you
# notice some packet loss, you may want to increase the size
- # of the sender buffer.
+ # of the sender buffer. The default size is usually around
+ # ~100 KBytes which is fairly small for busy firewalls.
#
- # McastSndSocketBuffer 1249280
+ McastSndSocketBuffer 1249280
# The multicast receiver uses a buffer to enqueue the packets
# that the socket is pending to handle. The default size of this
@@ -91,9 +92,10 @@ Sync {
# receiver queue. The overrun results packet loss, thus, losing
# state information that would have to be retransmitted. If you
# notice some packet loss, you may want to increase the size of
- # the receiver buffer.
+ # the receiver buffer. The default size is usually around
+ # ~100 KBytes which is fairly small for busy firewalls.
#
- # McastRcvSocketBuffer 1249280
+ McastRcvSocketBuffer 1249280
#
# Enable/Disable message checksumming. This is a good
diff --git a/doc/sync/ftfw/conntrackd.conf b/doc/sync/ftfw/conntrackd.conf
index 047ea48..e12a745 100644
--- a/doc/sync/ftfw/conntrackd.conf
+++ b/doc/sync/ftfw/conntrackd.conf
@@ -88,10 +88,11 @@ Sync {
# sender queue. The overrun results packet loss, thus, losing
# state information that would have to be retransmitted. If you
# notice some packet loss, you may want to increase the size
- # of the sender buffer.
- #
- # McastSndSocketBuffer 1249280
+ # of the sender buffer. The default size is usually around
+ # ~100 KBytes which is fairly small for busy firewalls.
#
+ McastSndSocketBuffer 1249280
+
# The multicast receiver uses a buffer to enqueue the packets
# that the socket is pending to handle. The default size of this
# socket buffer is available at /proc/sys/net/core/rmem_default.
@@ -99,9 +100,10 @@ Sync {
# receiver queue. The overrun results packet loss, thus, losing
# state information that would have to be retransmitted. If you
# notice some packet loss, you may want to increase the size of
- # the receiver buffer.
+ # the receiver buffer. The default size is usually around
+ # ~100 KBytes which is fairly small for busy firewalls.
#
- # McastRcvSocketBuffer 1249280
+ McastRcvSocketBuffer 1249280
#
# Enable/Disable message checksumming. This is a good
diff --git a/doc/sync/notrack/conntrackd.conf b/doc/sync/notrack/conntrackd.conf
index bc1a3a6..cbc26ee 100644
--- a/doc/sync/notrack/conntrackd.conf
+++ b/doc/sync/notrack/conntrackd.conf
@@ -66,9 +66,11 @@ Sync {
# sender queue. The overrun results packet loss, thus, losing
# state information that would have to be retransmitted. If you
# notice some packet loss, you may want to increase the size
- # of the sender buffer. Note: This protocol is best effort,
- # really recommended to increase the buffer size.
-
+ # of the sender buffer. The default size is usually around
+ # ~100 KBytes which is fairly small for busy firewalls.
+ # Note: This protocol is best effort, it is really recommended
+ # to increase the buffer size.
+ #
McastSndSocketBuffer 1249280
# The multicast receiver uses a buffer to enqueue the packets
@@ -78,9 +80,11 @@ Sync {
# receiver queue. The overrun results packet loss, thus, losing
# state information that would have to be retransmitted. If you
# notice some packet loss, you may want to increase the size of
- # the receiver buffer. Note: This protocol is best effort,
- # really recommended to increase the buffer size.
-
+ # of the sender buffer. The default size is usually around
+ # ~100 KBytes which is fairly small for busy firewalls.
+ # Note: This protocol is best effort, it is really recommended
+ # to increase the buffer size.
+ #
McastRcvSocketBuffer 1249280
#
More information about the netfilter-cvslog
mailing list